While cleaning your home, floor polishing is a necessary task. If you do it correctly, you can prolong the life of your flooring and remove accumulated dirt. Most people don’t give much thought to their floors, but these floor polishing tips will help you maintain the cleanness of your floor for longer. These tips include cleaning the floor thoroughly with a broom, preparing it for floor polishing, and cost. Listed below are some floor polishing tips.
Cleaning the floor with a broom
Cleaning the floor with a broom is a common household chore but not one to be obsessive about. This is because brooms pick up dirt and other debris, making them useless for other purposes. In addition, they can pick up the droppings of children and animals, so they are not ideal for use in kitchens. A broom should be used to clean the floor, not a counter or kitchen sink.
When sweeping the floor, remember that broom bristles can accumulate dust and dander over time. To avoid this, use a broom with fine, angled bristles. Angled brooms are better for corners. Cassandra Aarssen, a cleaning blogger and founder of the website ClutterBug, suggests using a broom with angled bristles to control piles and reduce dust in the air.
Once you’ve finished cleaning the floor with a broom, it’s time to disinfect the broom handle. We rarely wash our hands before sweeping, but we should. If you can’t find disinfectant wipes, spray a cleaning agent onto a clean towel and wipe the handle down. Repeat this process every few weeks until the broom looks shiny again. Then, you can store it in a dry place. Make sure the broom’s head is facing up.
When sweeping the floor with a broom, it’s important to clean any liquid messes first. Also, allow the floor to dry out completely before sweeping it. A wet floor can result in a larger mess. It’s also better to use a soft broom for indoor floors because the bristles are softer. You can also choose between an indoor or outdoor broom.
While sweeping floors may seem like a straightforward chore, there are a few things that you can do to make it easier. For one thing, you can use a broom with plastic bristles if you’re working with kids. The long handles may make it difficult for little ones to use. In addition, children can get injured if they try to use brooms with long handles.
Preparing the floor for floor polishing
Floor polishing begins with preparation. The floor must be thoroughly cleaned. Remove any stains and oil. Carpets should be removed, and the surface should be free of dust and debris. A heavy-duty cleaning and stripping solution on a concrete floor are essential. The solution used should be diluted according to the type of floor. Follow the manufacturer’s instructions for use and application. After the floor is clean, you can apply the floor polishing solution.
Concrete floor polishing Adelaide is a do-it-yourself project or can be outsourced to a professional. The most cost-effective method is to rent a concrete polishing machine. There are two types of concrete polishing: a wet and dry option. The wet method requires more preparation and is messier, but it preserves the abrasive’s integrity. Depending on the type of concrete, you may need a rental concrete floor polishing machine.
If your floor is particularly dirty, it is important to use a cleaning solution that contains a finish remover. The floor polish should dry thoroughly before allowing traffic on it. Once the polishing process is complete, cover furniture bases with heavy-duty felt protectors, particularly chairs. These simple steps will ensure that the floor polish does not become dull over time.
Concrete floor polishing contractors charge between two and six dollars per square foot for this service, depending on the type of finish and exposure of aggregates. A lower-cost option is associated with a floor with moderate aggregate exposure and a matte finish. DIY concrete floor polishing costs about 0.3$ to 0.5$ per square foot, largely due to equipment rental. This cost is still lower than hiring a professional to polish your floor, but you’ll have to pay for equipment rental.
High-speed machines can damage walls and furniture. If you plan to buff your floor, clear the area around the work area before you begin. You should thoroughly clean the floor before buffing, as dirt and debris will cause uneven finish, discolouration, and problems with the polish absorption, which will result in a less impressive shine. Wear protective gear when buffing, as finishing solutions can emit toxic fumes.
Methods of floor polishing
There are various methods of floor polishing. Some are cheaper than others, while others are expensive and may not suit all floor types. Concrete grinding is one of these methods, but it limits customisation. Honed concrete is very similar to grind-and-seal but uses a penetrating seal. Mechanical polishing involves hardening and digitising the concrete. The result can be smooth or textured depending on the polishing technique used.
Before starting the floor polishing process, thorough cleaning must be done. The floor should be scrubbed thoroughly, using a suitable cleaning solution and warm water. If the floor is wet, fans can be used to dry the surface. Once dry, polishing should be done using a flathead mop, starting from the corner and working outwards. You must make sure not to step on the polished part while mopping. After the floor is completely dry, you can follow up with another coat if required.
Another important factor when choosing a floor polishing system is productivity. The right machine and accessories will allow you to polish floors faster. Machines with 1,500 revolutions per minute are recommended for polished floors. But if your floors are made of linoleum, PVC, a single disk scrubbing machine with a heavy-duty base and a low-weight polish pad will do the trick.
Another factor that can influence your productivity when polishing concrete floors is using high-quality floor pads. They are equipped with mineral abrasives that enable the disk to polish floors more quickly and finely. High-quality pads also require strong cohesion between the abrasive particles and the fibres in the pad. Traditional deep-stripping operations involve replacing old finishes with new primers and topcoats. The result is a refinished floor with a shiny sheen.